The Drummer’s Guide to the TD-50 – Using the Transient Editor

One of the simplest yet most powerful tools in the TD-50 Module is the transient editor.

With this one screen, you can dramatically modify the attack and sustain characteristics of any of the acoustic-style factory sounds of the TD-50.

It’s possible to back the attack and release right off, for minimal stick attack with a quick decay for a more classic, rounded sound.

Going the other way, you can increase the attack for more stick and initial snap, then increase the release for more tail of the sound. This can create a more aggressive rock sound, with the desirable snap and hold of a compressor but without the “pumping” and “breathing” side-effects.
 

 

Button Presses & Values:
[INSTRUMENT] | [PAGE DOWN X2] | F4 (TRANSIENT ON) | R1 (Time) | R2 (Attack) | R3 (Release)
Gain: For overall volume adjustment.

RELATED ARTICLES

THE DRUMMER’S GUIDE TO THE TD-50 – BEEF UP YOUR KICK
THE DRUMMER’S GUIDE TO THE TD-50 – MAKE YOUR CRASH CYMBALS SOUND BIGGER
THE DRUMMER’S GUIDE TO THE TD-50 – GIVE YOUR SNARE SOUND MORE PUNCH
THE DRUMMER’S GUIDE TO THE TD-50 – MAKING YOUR TOMS SOUND DEEPER
THE DRUMMER’S GUIDE TO THE TD-50 – TWEAKING THE RIDE CYMBAL
THE DRUMMER’S GUIDE TO THE TD-50 – MAKING YOUR HI-HATS SOUND SOLID
THE DRUMMER’S GUIDE TO THE TD-50 – USING WAV SAMPLES WITH THE TD-50
THE DRUMMER’S GUIDE TO THE TD-50 – HOW TO USE PAD EFX AND MULTI EFX

TD-50KV with KD-A22

Go and Try It Yourself

If you enjoyed this article and want to learn more, find out where you can go and check out a TD-50KV kit for yourself.

> WHERE CAN I TRY A TD-50KV IN STORE?